Proper Way to Replace an Old Kitchen Faucet Easily

kitchen faucet replacement

A kitchen will never be complete without a faucet to provide clean water. This plumbing fixture allows you to have a source of water to help prepare your meals or wash various items in your kitchen and dining room. Without the presence of a working faucet in your kitchen, all of your cooking duties will be severely compromised. If you are in the middle of this particular scenario, the best course of action is to determine why your kitchen faucet is malfunctioning and how it can be best resolved. To help you out, here are the certain replacement steps you should follow if you have a defective faucet in the kitchen.

First and foremost, you need to locate the water valves under your kitchen sink. Once you have located this specific valve, turn it off immediately. This step will stop the flow of water into your kitchen, giving you the freedom to take out your old faucet and replace it with a new one. After turning the valve off, turn on your faucet to drain the remaining water and relieving it from pressure.

Now that there is no water flowing into the faucet, you can now start disconnecting it. To do this feat, you’ll need a pair of channel-locking pliers and an adjustable wrench to help you out. Place the pliers on one end of the water line and use the wrench to loosen it from its position. If the water supply line is showing signs of wear and tear, you should think about replacing them too with a flexible variant. Furthermore, do remember to place a basin underneath the supply line because there will be water coming out once it has been loosened.

After disconnecting the supply line, you can then take out your old and malfunctioning faucet. Be careful as you are performing this step because you might cause damage to other plumbing pipes inside your kitchen sink. There will be some dirt that will come out too from your old faucet so you need to prepare for that as well.

By this time, you should take out your trusty tape measure. This tool will help you get the accurate diameter of the holes in your kitchen sink. Compare those readings with those of your new faucet’s dimensions. This should be done to ensure there will be a perfect fit between the replacement faucet and the sink in your kitchen.

As soon as the measurements match up, insert the new faucet into those holes and seal them with the help of a gasket. After sealing the new faucet, get your tools again to connect it to the water supply line. Once it has been connected, turn on your kitchen’s water valve and the faucet afterward. You can now check if your new faucet releases water using the right amount of pressure. To make sure everything is working fine, check the area under the sink for any water leaks.

Although it might seem daunting at first, anyone can replace an old and worn out faucet in the kitchen. With the proper set of tools and a little bit of patience, you can accomplish this task faster than what you expected.

For more information, take a look here: elizabethdrainservice.com